Well, you can imagine my dismay when it started acting weird and quitting half way through cycles. It flashes all the lights and beeps a specified number of times as an error code. It kept alternating between "water not hot enough," "tub not draining," and "clogged in drain line." I was seriously having nightmares about it quitting completely.
Dave did some research online and decided to start by removing the filter that is before the pump and drain line. After that we would move on to testing the voltage of the drain pump and then see if the control board was still functioning.
This is what four years of washing dog-hair-laden clothes/linens and one year of cloth diapers does to a filter.
(Since we had the washer and dryer pulled away from the wall we decided to finally install the dryer vent thing in the outside wall. We bought it back when we replaced the water heater. Now the garage won't have to get all steamy and hot when we use the dryer. Woo!)
So I think every year around Eddie's birthday we'll clean out the filter...
6 comments:
I didn't even know washers had a filter! I better get Jeff to check ours too :D
Haha! What a funny story. I like your two men working away shirtless — a cozy scene. :) xoxo
naaaaaaasty! glad you fixed it, though!
Hilarious! And gross. I laughed our loud reading the "no wonder I couldn't find that ID anywhere" comment. Hope the washer continues to work well for you.
hahaha
I actually appreciate this post. i have been looking all over for this! Thank goodness i found it on Bing. You have made my day! thank you again
top super general front load washing machine
Post a Comment